sbl16xxct, sblf16xxct & sblb16xxctseries vishay semiconductors formerly general semiconductor document number 88727 www.vishay.com 11-feb-02 1 dual schottky barrier rectifier reverse voltage 30 and 40v forward current 16a 0.08 (2.032) 0.24 (6.096) 0.42 (10.66) 0.63 (17.02) 0.12 (3.05) 0.33 (8.38) mounting pad layout to-263ab dimensions in inches and (millimeters) 0.380 (9.65) 0.411 (10.45) 0.320 (8.13) 0.360 (9.14) 0.591 (15.00) 0.624 (15.85) 1 2 0.245 (6.22) min k k 0.160 (4.06) 0.190 (4.83) 0.045 (1.14) 0.055 (1.40) 0.014 (0.36) 0.021 (0.53) 0.110 (2.79) 0.140 (3.56) 0.090 (2.29) 0.110 (2.79) 0.047 (1.19) 0.055 (1.40) pin 1 pin 2 k - heatsink 0-0.01 (0-0.254) 0.027 (0.686) 0.037 (0.940) 0.105 (2.67) 0.095 (2.41) 0.205 (5.20) 0.195 (4.95) 1 3 pin 2 0.060 (1.52) 0.405 (10.27) 0.383 (9.72) 0.191 (4.85) 0.171 (4.35) 0.600 (15.5) 0.580 (14.5) 0.560 (14.22) 0.530 (13.46) 0.037 (0.94) 0.027 (0.69) 0.140 (3.56) 0.130 (3.30) 0.350 (8.89) 0.330 (8.38) 0.188 (4.77) 0.172 (4.36) 0.110 (2.80) 0.100 (2.54) 0.131 (3.39) 0.122 (3.08) 0.110 (2.80) 0.100 (2.54) 0.022 (0.55) 0.014 (0.36) dia. dia. 0.676 (17.2) 0.646 (16.4) 0.205 (5.20) 0.195 (4.95) 0.105 (2.67) 0.095 (2.41) pin 2 pin 1 pin 3 ito-220ab (sblf16xxct) to-220ab (sbl16xxct) to-263ab (sblb16xxct) 123 pin 0.185 (4.70) 0.175 (4.44) 0.055 (1.39) 0.045 (1.14) 0.145 (3.68) 0.135 (3.43) 0.350 (8.89) 0.330 (8.38) 0.560 (14.22) 0.530 (13.46) 0.022 (0.56) 0.014 (0.36) 0.110 (2.79) 0.100 (2.54) 0.603 (15.32) 0.573 (14.55) case 1.148 (29.16) 1.118 (28.40) pin 2 0.154 (3.91) 0.148 (3.74) 0.113 (2.87) 0.103 (2.62) 0.160 (4.06) 0.140 (3.56) 0.410 (10.41) 0.390 (9.91) 0.635 (16.13) 0.625 (15.87) 0.415 (10.54) max. 0.370 (9.40) 0.360 (9.14) pin 1 pin 3 0.028 (0.70) 0.104 (2.65) 0.096 (2.45) 0.035 (0.90) 0.205 (5.20) 0.195 (4.95) 0.105 (2.67) 0.095 (2.41) mechanical data case: jedec to-220ab, ito-220ab & to-263ab molded plastic body terminals: plated leads, solderable per mil-std-750, method 2026 polarity: as marked mounting position: any mounting torque: 10 in-lbs maximum weight: 0.08 oz., 2.24 g features ? plastic package has underwriters laboratory flammability classification 94v-0 ? dual rectifier construction, positive center tap ? metal silicon junction, majority carrier conduction ? low power loss, high efficiency ? guardring for overvoltage protection ? for use in low voltage, high frequency inverters, free wheeling, and polarity protection applications ? high temperature soldering guaranteed: 250?/10 seconds, 0.25" (6.35mm) from case
sbl16xxct, sblf16xxct & sblb16xxctseries vishay semiconductors formerly general semiconductor www.vishay.com document number 88727 2 11-feb-02 maximum ratings (t c = 25? unless otherwise noted) parameter symbol SBL1630CT sbl1640ct unit maximum repetitive peak reverse voltage v rrm 30 40 v working peak reverse voltage v rwm 21 28 v maximum dc blocking voltage v dc 30 40 v maximum average forward rectified current total device 16 at t c = 95? per leg i f(av) 8.0 a peak forward surge current 8.3ms single half sine-wave superimposed i fsm 250 a on rated load (jedec method) per leg operating junction and storage temperature range t j , t stg ?0 to +125 ? rms isolation voltage (sblf type only) from terminals 4500 (note 1) to heatsink with t = 1.0 second, rh 30% v isol 3500 (note 2) v 1500 (note 3) electrical characteristics (t c = 25? unless otherwise noted) parameter symbol value unit maximum instantaneous forward voltage per leg at 8.0 a (note 4) v f 0.55 v maximum instantaneous reverse current t c = 25? 0.5 at rated dc blocking voltage per leg (note 4) t c = 100? i r 50 ma thermal characteristics (t c = 25? unless otherwise noted) parameter symbol mbr mbrf mbrb unit typical thermal resistance from junction to case per leg r jc 2.0 4.0 2.0 ?/w notes: (1) clip mounting (on case), where lead does not overlap heatsink with 0.110 offset (2) clip mounting (on case), where leads do overlap heatsink (3) screw mounting with 4-40 screw, where washer diameter is 4.9 mm (0.19? (4) pulse test: 300 s pulse width, 1% duty cycle
sbl16xxct, sblf16xxct & sblb16xxctseries vishay semiconductors formerly general semiconductor document number 88727 www.vishay.com 11-feb-02 3 ratings and characteristic curves (t a = 25? unless otherwise noted) i f instantaneous forward current (a) 50 10 i r instantaneous reverse current (ma) typical reverse characteristics per leg 1.0 0.1 0.01 forward current derating curve 0 4 8 12 20 0 50 100 150 16 average forward current (a) peak forward surge current (a) number of cycles at 60 h z maximum non-repetitive peak forward surge current per leg 0 50 150 100 250 200 300 110 100 t j = t j max. 8.3ms single half sine-wave (jedec method) case temperature ( c) typical instantaneous forward characteristics per leg 1.0 10 50 0.01 0.001 0.1 t j = 125 c 75 c 25 c resistive or inductive load transient thermal impedance ( c/w) 0.01 110 100 10 100 0.1 0.1 1 t pulse duration (sec.) t j = 25 c t j = 125 c typical junction capacitance per leg pf junction capacitance 110 100 1,000 4,000 100 0.1 reverse voltage (v) t j = 25 c f = 1.0 mh z v sig = 50mvp-p instantaneous forward voltage (v) 0 0.2 0.1 0.6 1.1 1.2 0.4 0.3 0.7 0.8 0.9 0.5 1.0 pulse width = 300 s 1% duty cycle 0 20 100 40 60 80 typical transient thermal impedance per leg percent of rated peak reverse voltage (%)
legal disclaimer notice vishay document number: 91000 www.vishay.com revision: 08-apr-05 1 notice specifications of the products displayed herein are subjec t to change without notice. vishay intertechnology, inc., or anyone on its behalf, assume s no responsibility or liability fo r any errors or inaccuracies. information contained herein is intended to provide a product description only. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. except as provided in vishay's terms and conditions of sale for such products, vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and /or use of vishay products including liab ility or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyrigh t, or other intellectual property right. the products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify vishay for any damages resulting from such improper use or sale.
|
